Jumat, 20 Februari 2009

Download Free Resetter Pixma 1880

Waduh… mau ngeprint printer Error niy…. Pixma 1880 ngeblink oranye 8x , Ijo 1x
Kudu berguru ke bang Gogel dulu niy

Pertama dapet yang ini…http://soulved.blogspot.com/
masalah-printer-canon-ip-1800.html
Kedua dapet yang ini: http://printer-resetter.blogspot.com/
==cut comment==

Saya sudah memakai resetter untuk IP 1880 ini dan hasilnya memuaskan banget.
Sebagai informasi, resetter ini gak bisa mengubah status ink level indikator. Mungkin dari canon udah rancangan seperti itu. sehingga cara yang saya gunakan adalah mematikan setatus indikator untuk ink level.

Kalo untuk ngereset juga gak susah. Driver harus sdh terinstal dengan benar. Kabel USB juga terhubung. Selanjutnya,

1. sebelum kabel power printer dicolokin ke listrik, tekan dan tahan tombol power
2. colok kabel power ke listrik.
3. Sambil menahan tombol power, tekan tombol reject 2 kali lalu lepasin tombol power.
4. printer udah siap di reset. jalanin program reset.
5. Oya, jangan lupa buka Lock Release di program. Untuk dapat melihat menu lock release, minimal resolusi layar anda berjalan di 1024 x 728.
6. Lalu pilih set destination ke ip1880, tandai CLEANING dan EEPROM CLEAR, lalu klik MAIN dan PLATEN. Udah terus TES PATTERN1.

Sukses deh.

Read More ..

download Resetter for IP1700

i have downloaded software for ip1700 here
Service Manual and download Resetter for IP1700

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

thats work. dub

and for Pixma IP-1880 may you find

thx



http://canon-resetters.blogspot.com

Read More ..

Rabu, 18 Februari 2009

The Best For Reset Epson printer

1) het werk rechtstreeks met CSIC in de Epson Stylus printers patronen.
2) Reset of herschrijven, een chip met behulp van een speciale addon apparaat.
3) Freeze interne tellers inkt.
4) Reset interne tellers inkt zelfs met lege cartridges.
5) schoonmaken van de eigen kleur en zwart hoofden voor alle Epson inkjetprinters, krachtige reiniging modus.
6) Hot swapping cartridges ondersteund.
7) Het resetten van de bescherming tegen (zelfs dan is het al vol).
8) Meer dan 100 verschillende Epson-printers ondersteund

this support for
- support for R270
- support for R240
- support for R340
- support for CX2800
- support for CX3900
- support for CX4900
- support for CX5900
- support for C58/C59
- support for RX640
- improved support for C2100/2200
- improved support for RX700
- improved support for R2400
- improved support for 785EPX/825/895/915
- some other improvements and bug fixes

New in 4.20:
- support for CX4200/CX4700/CX4800/DX4200/DX4800
- support for C47/C48
- support for RX430
- support for CX6500/CX6300
- improved support for CX6400/CX6600
- improved support for RX500/RX510
- improved support for RX600/RX610
- improved support for R1800
- improved support for CX3700/CX3800/DX3800/DX3850
- improved support for C67/C68/D68
- improved support for C87/C88/D88
- many new chip models supported
- some other improvements and bug fixes

New in 4.10:
- support for PM-970C
- support for PictureMate
- support for RX700
- support for R2400
- support for PM-A700
- support for PM-G720
- support for RX520
- support for CX7800
- support for CX4100
- support for DX3800
- support for CX3800/CX3810
- support for CX3700
- support for C67/68 and Photo Editions
- support for C87/C88/D88 and Photo Editions
- support for R220/R230
- support for R320
- support for CX4500
- support for CX3650
- various bug fixes

New in 4.00:
- ability to work with additional reset device
- support for CX4600
- support for CX5300
- support for CX5100
- support for RX420
- support for RX425
- support for RX620
- support for R1800
- improved support for almost all other printers
- improved ink freezer
- improved ink monitor, implemented status information
- protection counter reset improvements
- various bug fixes

u can reset download here

Read More ..

Selasa, 17 Februari 2009

Cannon 2200/3300 Imagerunner HDD failure e602 error The machine has a error code 602-0003

E602
1) Are the connection and the cable of the connector (J1017) on the main controller PCB and the connector (J1551) on the hard disk drive normal? NO: Correct the cable connection.Hard disk drive (HDD), Main controller PCB
2) Try replacing the hard disk drive and downloading the system software.Is the problem corrected?
YES: End. NO: Replace the main controller PCB.
3) HDD unit.
Remove the rear upper cover and the reader rear cover. Remove the three screws, and detach the cover, Remove the two screws and disconnect the two connectors then, remove the HDD unit. Remove the six screws and detach the HDD When mounting the HDD unit,be sure that the flat cable is under the plastic sheet of the HDD upper case.

Read More ..

canon IRC3200 error

Canon Ink Cartridges , epson-inkjet, HP printers, Printer Cartridges,
E751 can be displayed when a connection error of the drum unit or toner cartridge occurs. The following are the detail of each sub code. You may find it helpful to refer to them when servicing. The suffix "x" of each sub code shows color of the affected drum unit or toner cartridge. (1=Y, 2=M, 3=C, and 4=k)
- 000x: Drum unit connection error (on printer side)
- 100x: Toner cartridge connection error (on printer side)
- 010x: Drum unit memory writing error
- 110x: Toner cartridge memory writing error
- 020x: Drum unit memory data error
- 120x: Toner cartridge memory data error
- 030x: Drum unit memory writing error (The number of reties exceeds the specified value.)
- 130x: Toner cartridge memory writing error (The number of reties exceeds the specified value.)

Though it can be memory related, it looks like a E751-1003 is Toner cartridge connection error (on printer side) Check the cyan drum or the cyan toner cartridge for now. Keep us posted when you try some of the details above.

Read More ..

Senin, 16 Februari 2009

Epson Stylus Photo 960 Paper Jam Sensor Repair

The first time a paper crinkled upon loading in my new printer it damaged the jam sensor and the paper light
was always blinking with no remedy and could not print. Having had Epson send me a rebuilt unit (which was
dead on arrival I decided to look for a repair – here’s what I found – Apparently this is very common with these
printers – and not that hard to fix – just a poor design on their part.
Tools needed: Long regular screwdriver, Phillips screw driver, hot glue gun (or drop of epoxy), flashlight.
1. Turn off and unplug unit.
2. First remove the top cover by carefully popping it off the hinge pins manually.
3. Remove upper housing case– here is how:
Remove 4 phillips screws total – 2 just outside of cover hinges and two inside the front of the carriage
area – all visible from the top.
Once the screws are out lift the back of the case a little then with a long screw driver reach way down in the
front corners (2) and release two barbed “catches” that hold the front of the case down – flashlight is handy
here. Work the cover up and pull the ribbon cable out of the control switch circuit board (Note colored side
of ribbon cable is towards you) and peel the cable loose where it is stuck to the case to release case now
free. Manual service download

Read More ..

Minggu, 15 Februari 2009

Epson C92 and Epson Photo R220/R230

Epson C92 and Epson Photo R220/R230
Here is the link for the adjustment program for Epson C92 and Epson Photo R220/R230
Epson C92 Adjustment Program
http://www.mediafire.com/download.php?wuu2pn1tnkw

Epson Photo R220/R230 Adjustment Program with indoreset.bat
http://www.mediafire.com/download.php?9jbogzhk99v

Read More ..

Sabtu, 14 Februari 2009

Epson Photo 1390 Adjustment Program

Epson Photo 1390 Adjustment Program
Here is the link for the properly labeled Epson Photo 1390. Just a correction to the file labeled CX1390.

Epson Photo 1390 Adjustment Program
http://www.mediafire.com/?gdtjykjm200

Read More ..

Selasa, 10 Februari 2009

Epson Stylus CX5500, CX5505 Resetter Adjustment Tool

— Adjustment –

* EEPROM Data Copy
* Head ID Input
* Top Margin Adjustment
* 1st dot position adjustment
* Head Angular Adjustment
* Bi-d Adjustment
* CR Motor Head protection control
* PF Band Adjustment

– Maintenance –

* Ink charge
* Waste Ink Pad Counter

– Appendix –

* Final check pattern print
* Set shipping data

Plus EPSON Refurbisment Program

* Print Nozzle check pattern
* Perform Powerfull head cleaning
* Perform Ink Charge
* Disable Shipping Setting

Download

Read More ..

CX6900F adjustment program

Here is the link for the newest reseter brought to us by yahoo group. Thanks to manny_chengjr of Philippines for the said reseter. He is very generous in sharing to the group.

Epson CX6900f adjustment
http://www.mediafire.com/?1xjyjmxnjdt

Read More ..

Senin, 09 Februari 2009

Newest Epson SSC Service Tool sscserve.exe 4.30

Newest Epson SSC Service Tool sscserve.exe 4.30
SSC Service Utility for Epson Stylus Printers.

Main features.

SSC Service Utility allow you to do many amazing things with Your Epson printer :

1) Work directly with CSIC in Epson Stylus printers cartridges.
2) Reset or rewrite any chip using special addon device.
3) Freeze internal ink counters.
4) Reset internal ink counters even with empty cartridges.
5) Separate cleaning of color and black heads for all Epson inkjet printers, powerful cleaning mode.
6) Hot swapping of cartridges supported.
7) Resetting of protection counter (even then it is already full).
8) More then 100 different Epson printers supported

download

Read More ..

Epson Stylus C90 Resetter

RUN-RESET.bat

C:\C 90 (10-07-2007)>RUN-RESET.bat
**
** FREE DOWNLOAD RESETER
** http://epson-drivers.co.cc
** change the date as listed here
** R270 = 18 Jan 07
** R250 = 15 Feb 06
** C58 = 9 Nov 06
** C79 = 1 Nov 06
** C68/67 = 19 June 2006
** R350 = 23 Jan 2007
** C87 = 5 Dec 2005
** RX500 RX510 = 13 Nov 2006
** RX600 RX620 RX630 = 7 Oct 2004
** RX700 = 10 May 2005
** CX3900 = 23 Jan 2007
** R210 = 13 Sept 2006
** C59 = 18 Jan 2007
** CX3700 = 17 Jan 2006
** CX4700 = 17 Jan 2006
** CX2800 = 18 Dec 2006
** CX5900 = 18 Dec 2006
** C90 = 16 Aug 2007 ( Singapore )
** C90 = 11 July 2007 ( indonesian )
** CX1390 = 4 Oct 2007
** R390 = 1 Jan 2007
** RX650 = 13 February 2007 (m4b1th)
** R290 = 1 April 2008 (manny_chengjr)
** C110/CX7300/CX8300/CX9300F = 11 April 2008 (e2500e)

The operation completed successfully
** ( Run the Adjustment now .. just minimized this windows )

AdjProg.exe

Download :

Mirror 1 (Recommended)

Read More ..